Therefore, if using an HDMI video connection, be sure to check the video graphics adapter driver settings to make sure the correct range for a computer display monitor are being used. On other models the calibration will finish, but the final results will show a distorted gamma curve.When calibrating the monitor, on some display models the calibration may fail and display an error message.Significant color banding may be present.The resulting screen image will appear slightly washed out and lacking in contrast.Darker than normal whites (because “white” is level 235 rather than 255).Very poor black levels (because “black” output from the computer is actually level 16 rather than 0).If incorrectly configured, this can lead to: TV devices typically use the range 16 to 235, rather than the full 0 to 255 range used by computer display monitors. The range of video levels used in the video signal is different between TV devices and computer display monitors. When using an HDMI video connection to the display, beware that many video graphics adapters will by default treat the display as a TV-type device rather than a computer monitor.HDMI and video graphics adapter driver settings: Until that time, it is recommended to revert to the Catalyst driver prior to version 14.9. AMD is aware of this issue and it is expected to be fixed in a future update to the Catalyst drivers. The AMD Catalyst version 14.9 drivers for Windows have a compatibility issue that causes this software to immediately give an application error when starting.With the full drivers from your video graphics card vendor, unless using USB to communicate with the display instead of DDC/CI.Īpplication Error with AMD Catalyst drivers for Windows: The video drivers included with Windows must be updated This version of SpectraView II is compatible with Windows 8, 8.1 and 10.Do not set this to "Automatic" or to any value other than "6500K". This feature can severely impact the accuracy of on-screen colors when it is not set to the default "6500K". New versions of the AMD video settings application, for Radeon and FirePro products, include a feature called "Color Temperature".Navigate to the following page for more information: New firmware for the following display models is available which adds some functionality improvements. The SpectraView application directory but are not automatically installed. Drivers are not needed for the X-Rite iOne Display Pro and NEC SpectraSensor Pro color sensors.ĭrivers for other color sensors are copied to USB drivers for the X-Rite Eye-One, iOne Pro2, Datacolor Spyder 3, 4 and 5, and BasICColor Discus color sensors are automatically installed if selected in the SpectraView software installation process. This can be used in cases where the video graphics adapter is not Using an optional USB connection to the display for communicating, instead of The MultiSync PA Series of display monitors also feature This communications link is called DDC/CI (Display DataĬhannel - Command Interface) and is an industry standard developed by Special support is required in the video graphics displayĭriver in order to provide this functionality. The software uses a two way communications link with theĭisplay monitor via the video graphics adapter and normal video cable. SpectraView II provides automatic display monitor colorĬalibration and profiling functions for supported models of NEC display monitors. Graphics Adapter and Chipset manufacturers web links SpectraView II ReadMe Information for Windows NEC DISPLAY SOLUTIONS SpectraView II ReadMe NEC DISPLAY SOLUTIONS
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |