This takes precedence over cartridge body alignment in the case of Lyra, Soundsmith and other cartridges. In these cases align stylus along centreline of the card. However this does not apply to all cartridges and some brands do not build their stylus aligned symmetrically with the body. Align stylus or cartridge body? Most cartridge bodies have faces that are perfectly aligned with the cantilever so you can align the cartridge body on the gauge. Ensure the headshell wires are bent so they are clear of the record surface. However careful you’ve been, always check the alignment again after tightening. Tightenin g one screw fully before tightening the other is almost certain to move the cartridge out of alignment. Gradually tighten each screw in turn until tight. 3.1 Registering a new account 3.2 Errors 3.3 Apache SSL with Proxypass 3.4 Upgrades. When all adjustments are correct, carefully tighten down the cartridge mounting screws keeping a firm grip on cartridge and headshell together so nothing shifts. 1 smeserver-rocketchat contrib 2 Current version 3 Required repos. Repeat procedure if ne cessary till desire d result is achieved. Once you have updated the version: docker pull rocketchat/rocket.chat:latest docker-compose stop rocketchat docker-compose rm rocketchat docker-compose up -d rocketchat This will upgrade RocketChat to any 4.x version. Twist the cartridge body in the headshell till body or stylus aligns with grid then re-check overhang. RocketChat can be easily upgraded by updating the RocketChat container version in your docker-compose.yml file. Gently lower the cartridge onto the alignment gauge and follow the instructions printed on it. Once overhang is set, place the alignment gauge on the platter as shown bel ow.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |